Accurate Floor Grid Machine Operator - 31806

Company:

The Boeing Company

Job ID:

00000424214

Date Posted:

2024-08-20

Location:

USA - Everett, WA

Job Description Qualifications:

The Boeing Company is seeking an Accurate Floor Grid Machine Operator to join our team supporting Boeing Commercial Airplanes in Everett, WA.  This is an exciting opportunity to Set-up, adjust and operate CNC riveting machines.

As a AFG Floor Grid Machine Operator you will set up and operate numerically controlled drilling machines to perform the hole preparation such as drilling and counter-sinking of floor grid structures. Load, position, index, and fasten work holding devices and parts. Check own setup and work to be certain that finished parts will meet quality requirements and specifications. Perform necessary selection, checking, adjusting, and installation of various types of tools to prove control media.

Position Responsibilities

Obtain appropriate drawings, Boeing (BAC) specification, documents and/or sketches, as required, using online computing systems, as required. Locate material to be riveted specified on W/O, IP (Installation Plan) or drawings from ready to work rack.

Ensure that correct part numbers and quantity of kitted (pre-picked) or hand picked detail parts, standards and assemblies were issued/selected, by comparing to IP and/or BOM (Bill Of Material) on drawing.

Make sure parts issued are free of visible defects.

Prepare to set-up job or run previously set-up job by reviewing work order, tie-in sheets, engineering drawings, specifications, planning orders, machine operation instructions.

Check machine set-up and/or parts completed by previous operator to determine progress on a job and ensure safe working conditions, as required.

Retrieve and download CNC programs to machine controller using computing equipment connected to various servers/data bases.

Identify type of set-up required. Select, install and adjust tools required for each setup

Run test coupon to check holes and fastener installation prior to running production parts.

Load and unload drill bits following program information or set-up documents, using tool holders and hand tools.

Adjust machine settings to correct drilling speed and speed rates

Monitor machine gauges and controller display for problems and visually ensure smooth operation.

Check work after completion of each operation in job and/or completed job to ensure assembly is complete per drawing, that there are no defects (e.g., gapped heads, high rivets, tool marks, incorrect length fasteners, seal voids), prior to putting up for inspection.

Perform minor rework as required (e.g., pick-ups).

Handle and dispose of hazardous materials (e.g. coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment as required.

Recommend changes in CNC program to simplify or improve processes.

Maintain personal and tool certifications as required.

Comfortable working in an environment with constant or intermittent sounds or pitch

Ability to work in in an environment with fumes, noxious odors, dust, and mists

Be able to utilize cleaners and Lubricants

Utilize Face/Eye Protection (safety glasses, goggles, and face shields), Hearing Protection (ear inserts, canal caps, earmuffs), Protective Footwear preferred (steel-toed shoes, rubber boots, foundry, conductive and electrical hazard footwear)

This position is expected to be 100% onsite.  The selected candidate will be required to work onsite at one of the listed location options.

The position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

1+ years of experience with various types of hand held power tools

Capable of lifting, pushing and pulling up to 35lbs

Ability to stand and move (reach, bend, or stoop) to handle products for extended periods of time

Experience with any of the following: power-feed drilling, hand drilling, drill equipment, drill bits, cutters, cutter design, drill bushings, and/or drill nosepieces

Preferred Qualifications (Desired Skills/Experience):

Experience operating 3 axis NC/CNC machine tools

Experience with either Siemens, Fanuc, or Mazatol controllers

Experience working with hazardous materials

Ability to read and understand engineering drawings, blueprints, schematics, and specifications

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistant is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Shift:

This position is for variable shifts.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. 

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. 

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Summary pay range: $21.00- $45.04

Applications for this position will be accepted until September 20th, 2024.

Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Relocation:

No relocation available

Export Control Requirement:

Safety Sensitive:

This is not a safety sensitive position

Contingent Upon Award Program

This position is not contingent upon program award

Experience Level:

Hourly

Job Type:

Regular

Job Code:

31806-029

Equal Employment Opportunity:

Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website.

Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Request an Accommodation - Requesting Interview Accommodations

Applicant Privacy - Applicant Privacy

EEO is the law Poster - EEO is the law

Boeing Policy on EEO - Boeing EEO Policy

Affirmative Action and Harassment - Boeing Affirmative Action and Harassment

Boeing Participates in E – Verify

English -  E-Verify (English) Spanish - E-Verify (Spanish)

Right to Work Statement

English - Right to Work (English) Spanish - Right to Work (Spanish)