Summary This National Guard position is for an AIRCRAFT ORDNANCE SYSTEMS MECHANIC, Position Description Number D0021000 and is part of the OH 180 Fighter Wing, Ohio Air National Guard. The primary purpose of this position is to perform on and off equipment maintenance on aircraft egress systems, such as aircraft ejection seats, extraction and escape systems, egress components of jettison canopies, explosive components of escape hatches and doors, and egress trainers. Responsibilities As an AIRCRAFT ORDNANCE SYSTEMS MECHANIC, WG-6652-10, you will perform the following duties: 1. Troubleshoots, installs, removes, repairs, modifies, adjusts, inspects, and tests such components as regulators, flow indicators, actuator motors, thruster and positioning mechanisms, seat actuators, catapult guide rails, ejection seats, rocket packs, and canopies, etc. Inspects for safety, serviceability and maintainability of systems prior to installation, removal, repair, or adjustments of components and insures proper installation and positioning of safety pins, initiators, simulators, and de arming mechanisms. Visually inspects ballistic lines, tubes, hoses, and linkage for damage, deterioration, restrictions, and security of connections and mountings, and performs corrective maintenance as required. Stores egress explosives IAW AFOSH standards. 2. Inspects pressurization system air pressure gauges for sufficient pressure and bottles and regulators for general condition and serviceability. Checks canopy and capsule structure and associated seals, latches, and locks for damage and security. Installs and maintains Jet Assistance Take Off (JATO) systems when applicable. Isolates the malfunction and takes necessary corrective action. Positions, repairs, and adjusts required aerospace ground equipment, such as rail extensions, hoists, slings, dollies, and trailers used in performing maintenance tasks. 3. Performs installation, modification, and repair of aircraft egress systems. Solves unusual installation and maintenance problems by studying layout drawings, schematic and wiring diagrams, applicable technical publications, and analyzing construction and operating characteristics of egress systems. Selects proper maintenance and repair procedures and corrects the malfunction and/or defective equipment. Diagnoses recurring malfunctions and recommends corrective action by initiation of Quality Deficiency Reports, proposed modifications, or other appropriate action. 4. Performs maintenance, troubleshooting, overhaul, repair, modification and periodic servicing of air munitions and munitions systems applicable to reconnaissance aircraft. Accomplishes receipt, identification, inspection, storage and delivery of applicable munitions. Delivers unserviceable or serviceable excess ammunition to authorized disposal activity. 5. Schedules periodic maintenance of aircraft munitions systems when notified by Maintenance Control of inspections due. Inspects munitions required for reconnaissance flights. Advises on technical questions related to reconnaissance air munitions. Analyzes difficult malfunctions and performs electrical ring-out of reconnaissance munitions systems, e.g., breech blocks, bomb racks, and drop tanks. Whenever munitions are installed, test electrical circuitry for normal operation of systems equipment and tests for absence of unwanted electrical signal or power prior to connecting electrically actuated reconnaissance mission munitions. 6. Loads cartridges, flares, etc., into aircraft systems and removes if not used in flight, following applicable handling, loading, and checkout procedures. Insures compliance with operational policies, maintenance directives, technical instructions, and standard operating procedures. Attaches and adjusts required air munitions stabilizing, control, and safety devices, i.e., drop tank pins, photo flash door cranks and pins, center line safety pins, etc. Assures all switches in aircraft controls are off when servicing munitions. 7. Enforces safety, fire, security, and housekeeping regulations. Insures that material and equipment are properly and safely stored, protected, and maintained. 8. Reviews bench stock to determine adequacy and to determine required renewals/deletions to accomplish programs. Inventories, provides security, and monitors the condition of assigned equipment. Maintains and reviews publication files of applicable technical orders, regulations, manuals, and local directives. 9. Assists in training of Drill Status Guardsmen. Assists in training of technician augmentees for emergency arming/de-arming of cartridges. 10. Prepares for or participates in various types of readiness evaluations such as ORI, IG and UE inspections, mobility, and command support exercises. May be required to perform such additional duties as structural firefighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, or serve as a member of a team to cope with natural disasters or civil emergencies. 11. Performs other duties as assigned. *The above duty description does not contain all details of the official position description. A copy of the entire position description can be found on FASCLASS by searching the position description PD#: (D0021000). https://acpol2.army.mil/fasclass/search\_fs/search\_fasclass.asp Requirements Conditions of Employment Ohio Air National Guard Membership is required. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. MILITARY REQUIREMENTS: Compatible military grade and assignment required within one year of the effective date of placement. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the Ohio Air National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Ohio Air National Guard recruiter prior to applying for this position. Military Grades: E2 through E6 Compatible Military Assignments: 2A6X3 Other Requirements: 1. Must be able to obtain and maintain the appropriate security clearance. 2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. 5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Qualifications GENERAL EXPERIENCE: Experience or training which demonstrates the applicant's ability to repair malfunctions of ordnance equipment and components. Ability to use sketches, electrical diagrams, technical specifications, and engineering drawings. Experience which demonstrates skill in the use of test equipment to make electrical, hydraulic, and pneumatic checks. SPECIALIZED EXPERIENCE: Experience or training in planning and layout of repair sequence and ability to complete modification, repair, and installation of ordnance systems. Experience in diagnosing and troubleshooting malfunctions and determining remedies where complex relationships exist. Experience in hand tools and the use of a variety of measuring and test equipment. Experience in interpreting technical directions, blueprints, sketches, wiring diagrams, and manufacturer's specifications. Education Additional Information ***If serving under an incentive contract, termination of that incentive(s) will occur effective one day prior to your AGR, Permanent Military Technician, or Indefinite Military Technician start date. Temporary Military Technicians will have their incentive terminated if their tour exceeds 179 days in a continuous 12-month period.*** If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).