/*generated inline style */ Opportunity ID
12085
/*generated inline style */ Company ProfileThis position will be temp to hire for all external candidates. Your application will be forwarded to an agency and they will be contacting you for the next steps in the hiring process.
With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability – not just in the materials and products we make, but in the people we recruit.
PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.
In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.
/*generated inline style */ Job DescriptionTo facilitate the production of vacuum melted ingots from mold preparation to shipping finished ingots. To assist vacuum furnace operators in the master melt process. To take part in the preparation and pouring of ingots as well as associated foundry tasks. To complete ingot stripping, grinding, blasting, inspection using Robotics work cell or manual method. To prepare shipments of finished ingot to the end user. Works in one or more of the following accountability areas.
PRINCIPAL ACCOUNTABILITIES:
1. Preparation.
Objective: to take part in the metal and furnace preparation needed to efficiently complete pouring and shipping schedules.
Typical Activities:
Inspects and delivers metal ingot molds to furnace areas.Cleans ,inspects, and inserts graphite plugs into ingot molds.Operates and corrects robot deficiencies and product flow problems as needed.Loads and unloads ingot molds and mold racks using fork lift truck and overhead cranes and hoists.Removes from molds, cleans, inspects, type checks, weigh and ships vacuum melted ingots.May load melting pots with metals.Complete paperwork and logs.Type checks ingots using hand held analyzer.Blast, grind , and mark ingots for shipping.Type check , bag , and prepare ingots for shipping.
2. Vacuum Furnace Operations
Objective: to work in team with Furnace Operators to assure efficient, accurate pouring of ingots.
Typical Activities:
Inspects, sets up and operates MM mold racks.May run conveyor system to assist in pouring ingots in both Master Melt furnaces.Observes ingot casting process via window and/or video.Knocks MM ingots from molds; cleans molds and cuts ingots as required.Operates robotic work cell and related equipment.Puts insulating material on top of molds to maintain molten status.Delivers properly identified ingots for cleaning.
3. Maintenance.
Objective: to clean furnaces and maintain foundry areas.
Typical Activities:
Provides minor maintenance and troubleshoots equipment problems.Cleans furnaces, robots, blasting unit and supporting equipment.
4. Safety.
Objective: to take responsibility for and demonstrate safe work practices.
NOTE: for job positions that require respiratory protection (more than a filtering face piece – dust mask):
In compliance with the Oregon Occupational Safety and Health Division Personal Protective Equipment standard for Respiratory Protection, OAR 437, Div. 2/I 1910.134 and Oregon Health Division Rules for the Control of Radiation, OAR 333. Div. 120 (333-120-300 through 330), certain tasks within this job position require/may require the use of a NIOSH-approved respirator. An individual will not be assigned to these tasks if the person is not able to work under these conditions. Respirator selection will be based on the work performed, exposure information, duration of use and any other relevant factors. If a tight-fitting respirator is required, facial hair, temple pieces on glasses or other items that interferes with the face-to-face piece seal of the respirator are not permitted.
Typical Activities:
Adheres to plant and department safety rules.Safely operates all equipment and tools.Identifies and reports safety problems.5. Performs other tasks as assigned.
TRAINING:
Training is provided on the job.PCC's Fork Lift Driving Safety Certification Training must be completed.Basic computer training may be required.
ENTRY QUALIFICATIONS:
Ability to follow instructions, read, write and perform arithmetic calculations.Ability to lift and/or maneuver objects weighing thirty to fifty pounds.Ability to work as a team member.Ability to work in difficult working conditions which may include exposure to noise, dust, chemicals, temperature extremes, molten metal and other elements for extended periods of time.Ability to safely maneuver heavy loads with overhead cranes/hoists.Prefer previous experience with overhead cranes/hoists and automated equipment.
ESSENTIAL EQUIPMENT, VEHICLES, MACHINERY AND/OR TOOLS USED:
ForkliftHoistBasic hand tools (e.g. wrenches, hammers, screwdrivers, etc.)Chains, straps and various lifting equipmentOverhead cranePangbornInvex analyzerAbrasive sawHand grindersScaleConveyor beltRobotic ingot processing cell /*generated inline style */All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
/*generated inline style */ This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. 'Green Card Holder'), and certain categories of Asylees and Refugees. /*generated inline style */