Calibration Technician
Lockheed Martin
Job ID: 687335BR Date posted: Mar. 04, 2025
Description:OCCUPATIONAL SUMMARY
This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment on a Navy facility or within Navy vessels. Maintain standards to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes.
Utilize technical expertise, knowledge, techniques, and procedures in the calibration of equipment and instruments. Independently determine and perform all operations required for complete calibration, repair, and maintenance of instruments and measurement systems including malfunction diagnosis and correction.
An increased level of coordination, scheduling, security access, physical capability, physical mobility and worksite travel is required for In-Place calibrations.
WORK PERFORMED
Plan methods, procedures, documentation, and determine that equipment to be calibrated is in suitable condition for calibration and use, locate faults, and complete repairs.
Perform calibration, troubleshooting, repair, and adjustment in the laboratory or in-place on electrical/electronic or physical/mechanical Test, Measurement and Diagnostic Equipment (TMDE) such as, but not limited to: AC/DC voltage, AC/DC current, resistance, capacitance, inductance, power, phase, frequency, and microwave, pressure, vacuum, liquid and gas flow, mass length, optical, temperature, humidity, torque, force vibration, and tachometry calibrations.
Analyze errors, interpret and utilize NIST, International Standards Organization (ISO), or other reports and corrections for any level of calibration and measurement. Maintain current knowledge of equipment and measurement techniques to perform measurements with minimum direction from metrologists.
Assist in the generation and proof-testing of new calibration procedures. Review and update procedures to reflect new technology and/or equipment improvements.
Use manuals, procedures, data sheets, along with the recommended equipment to adjust, measure, and record equipment performance parameters under specified conditions during the performance of testing and calibration.
Inform metrologists of instruments which can no longer be maintained within specified tolerances or operate throughout a specified range. Recommend an appropriate solution such as retirement, deration, limited performance, etc. Assist metrologists in troubleshooting of instrument problems.
Monitor the performance of laboratory standards in use. Troubleshoot and repair laboratory standards as required.
Collect data for trend charts and check standards.
Participate in Government and commercial audits and assessments. Perform in-place calibrations.
Perform related duties as required.
Provide guidance and assistance to less experienced employees in the performance of duties described.
Basic Qualifications:
-Successful completion of the basic DoD Calibration School, or an Associate of Science degree in Engineering technology or electronics, or technical knowledge in the field of electronics/physical sciences equivalent to completion of two year of courses in electronics, metrology, physical measurements, or other related subjects.
-Skilled in the development of techniques and procedures; particularly for pursuing performance malfunction diagnosis, during calibration of new instrumentation or systems, where typical or usual methods may not achieve necessary results.
-Skilled in the art of calibration and repair of electrical/ and electronic, mechanical, and electro-mechanical instrumentation and systems, such as, but not limited to: basic DC units, basic AC units, digital equipment, resistance, power supplies and recorders, signal processing equipment, electronic counters, temperature, pressure, vacuum, etc.
-Possess an understanding of measurement uncertainty and its application in the calibration process.
-Ability to work independently and give technical assistance to others.
-Possess mechanical aptitude and the ability to use general purpose hand tools.
-Skilled in the use of computers and ability to learn new computer applications.
-Ability to qualify for and maintain certifications/qualifications and/or licenses to perform assigned duties.
-Ability to obtain and maintain a DOD Security Clearance. --Must have interim Secret Clearance prior to start.
Desired Skills:
-Previous In-Place (on-site) calibration experience.
-Demonstrated ability to communicate across functions to achieve desired outcomes.
-Flexibility to support after-hour emergent work.
-Proven history of working and developing peers and/or lower-level employees.
-Proactive self-starter with a positive attitude, i.e., effectively prepare work standards and resources required to support scheduled service.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
Description:OCCUPATIONAL SUMMARY
This classification requires the performance of precise calibration measurements and repair functions on electrical/electronic/physical/mechanical type reference and secondary standards, and related equipment on a Navy facility or within Navy vessels. Maintain standards to the requirements necessary for achieving traceability to the National Institute of Standards and Technology (NIST), the United States Navy, or other recognized national metrology institutes.
Utilize technical expertise, knowledge, techniques, and procedures in the calibration of equipment and instruments. Independently determine and perform all operations required for complete calibration, repair, and maintenance of instruments and measurement systems including malfunction diagnosis and correction.
An increased level of coordination, scheduling, security access, physical capability, physical mobility and worksite travel is required for In-Place calibrations.
WORK PERFORMED
Plan methods, procedures, documentation, and determine that equipment to be calibrated is in suitable condition for calibration and use, locate faults, and complete repairs.
Perform calibration, troubleshooting, repair, and adjustment in the laboratory or in-place on electrical/electronic or physical/mechanical Test, Measurement and Diagnostic Equipment (TMDE) such as, but not limited to: AC/DC voltage, AC/DC current, resistance, capacitance, inductance, power, phase, frequency, and microwave, pressure, vacuum, liquid and gas flow, mass length, optical, temperature, humidity, torque, force vibration, and tachometry calibrations.
Analyze errors, interpret and utilize NIST, International Standards Organization (ISO), or other reports and corrections for any level of calibration and measurement. Maintain current knowledge of equipment and measurement techniques to perform measurements with minimum direction from metrologists.
Assist in the generation and proof-testing of new calibration procedures. Review and update procedures to reflect new technology and/or equipment improvements.
Use manuals, procedures, data sheets, along with the recommended equipment to adjust, measure, and record equipment performance parameters under specified conditions during the performance of testing and calibration.
Inform metrologists of instruments which can no longer be maintained within specified tolerances or operate throughout a specified range. Recommend an appropriate solution such as retirement, deration, limited performance, etc. Assist metrologists in troubleshooting of instrument problems.
Monitor the performance of laboratory standards in use. Troubleshoot and repair laboratory standards as required.
Collect data for trend charts and check standards.
Participate in Government and commercial audits and assessments. Perform in-place calibrations.
Perform related duties as required.
Provide guidance and assistance to less experienced employees in the performance of duties described.
Basic Qualifications:
-Successful completion of the basic DoD Calibration School, or an Associate of Science degree in Engineering technology or electronics, or technical knowledge in the field of electronics/physical sciences equivalent to completion of two year of courses in electronics, metrology, physical measurements, or other related subjects.
-Skilled in the development of techniques and procedures; particularly for pursuing performance malfunction diagnosis, during calibration of new instrumentation or systems, where typical or usual methods may not achieve necessary results.
-Skilled in the art of calibration and repair of electrical/ and electronic, mechanical, and electro-mechanical instrumentation and systems, such as, but not limited to: basic DC units, basic AC units, digital equipment, resistance, power supplies and recorders, signal processing equipment, electronic counters, temperature, pressure, vacuum, etc.
-Possess an understanding of measurement uncertainty and its application in the calibration process.
-Ability to work independently and give technical assistance to others.
-Possess mechanical aptitude and the ability to use general purpose hand tools.
-Skilled in the use of computers and ability to learn new computer applications.
-Ability to qualify for and maintain certifications/qualifications and/or licenses to perform assigned duties.
-Ability to obtain and maintain a DOD Security Clearance. --Must have interim Secret Clearance prior to start.
Desired Skills:
-Previous In-Place (on-site) calibration experience.
-Demonstrated ability to communicate across functions to achieve desired outcomes.
-Flexibility to support after-hour emergent work.
-Proven history of working and developing peers and/or lower-level employees.
-Proactive self-starter with a positive attitude, i.e., effectively prepare work standards and resources required to support scheduled service.
Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration.
Clearance Level: Secret
Other Important Information You Should Know
Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
Schedule for this Position: 4x10 hour day, 3 days off per week
Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.
The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.
At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work.
With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.
If this sounds like a culture you connect with, you’re invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.
Experience Level: Hourly/Non-Exempt
Business Unit: SPACE
Relocation Available: No
Career Area: Technicians
Type: Full-Time
Shift: First
Confirm your E-mail: Send Email
All Jobs from Lockheed Martin