ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB:

Correctly wand onto the shop floor data system for labor Read and follow appropriate product criteria, activity instruction’s, and elements Follow all safety precautions as spelled out in the Activity Instruction Use of appropriate equipment/tools (Press, Pill Heater, Belt Sander, Anneal Bake Oven, Ring Press, CNC Machines, Burr Gun, Ultra Max, Hand Tools) Form and finish cores per Activity instruction and product criteria Load anneal bake setters per product criteria, if required Load and unload anneal bake oven, if required Understanding of loading and operation of CNC machines Responsible for visual and dimensional quality of green cores (gauge cores) Visually inspect cores for unacceptable defects per the product criteria or activity instruction Correctly wand lot travelers and scrap after each tray and take cores to kiln truck Fill out OEE sheets Maintain clean work area and perform TPM per schedule Perform pre-shift die inspection and TPM checklist. Observe safety policies and regulations Maintain high attendance record Basic understanding of the use of dial calipers, micrometers and pin gauges Understand use of the HCS ‘Help Chain” Maintain pacing via Aussie Pace System Perform Problem Solving with Leadership Perform other duties as directed by Leadership Cut tie bar (CTB) per pro High School diploma or GED equivalency Three (3) months’ on-the-job training to fulfill introductory period Six (6) months’ experience to be eligible for certified operator status Ability to read and comprehend written instructions Mental and visual attention Perform to productivity and quality standards Ability to work in a team-oriented environment ​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position. This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.

**The work schedule for this position is 2nd shift Monday through Friday from 2:30pm to 10:30pm. 

ESSENTIAL FUNCTIONS (DUTIES) OF THE JOB: Correctly wand onto the shop floor data system for labor Read and follow appropriate product criteria, activity instruction’s, and elements Follow all safety precautions as spelled out in the Activity Instruction Use of appropriate equipment/tools (10x Magnifying Glass, Brushes, Patch/Ludox, Sandpaper, Ultra Max, Diamond File, Flat File, Disc, Burr, Collet, Mandrel, Tie Bar Machine, Go/NoGo Pins, other equipment/tools as required) Visually inspect core for obvious scrap Prepare tie bar machine according to AI (if applicable) Cut tie bar (CTB) per product criteria (if applicable) Prepare CTB machine for blending using proper equipment (if applicable) Blend tie bar (if applicable) Correctly perform Post-Fire CNC Operation Check slot width with go/no go pins if required by product criteria (gauge cores) or if excessive finish is performed Visually inspect cores for unacceptable defects per the product criteria or AI such as cracks, chips, excess parting lines, negatives, crazing, and positives Use ceramic patch material where allowed by the product criteria, to repair cracks, chips, negatives, and crazing. Remove excess patch using brush or sandpaper Communicate with pre fire operators any current quality issues Core fill slots with liquid wax per product criteria and other core prep work as called out on the product criteria such as adding standoffs Correctly wand lot travelers and scrap after each tray Maintain pacing via ½ hr x ½ hr sheets or Pace Board Use Pace System when applicable Work with Leadership on Problem Solving Understand use of the HCS ‘Help Chain”  Maintain clean work area Observe safety policies and regulations Maintain high attendance record  Perform other duties as directed by Area Leadership

 

CRITICAL SKILLS/EXPERTISE: (FOR THIS JOB SPECIFICALLY) Ability to record data High degree of manual dexterity Basic mathematical skills Interpret PMS/Activity Instructions