Introduction to the job

Do you want to work on engineering hands-on challenges in an international environment? Do you want to be part of the expanding European team working on the newest ASML EUV machines? Join ASML and become part of group of young international System Install  & service Engineers in Europe. In this role you build the machine from scratch as an advanced LEGO sculpture at the Multiple customer sites across Europe , within specifications, on-time, with quality exceeding the customers’ expectations. Before you start you will get an international one-year training program in Europe & Asia.

 

As a System Install Engineer you will be working at the frontiers of technology. The goal of your job is to install leading edge lithographic systems, at the customer site, within specifications, on time, with quality exceeding the customers’ expectations.

 

Job Description

Our Customers across European Region are currently expanding their factories in Ireland, Israel, Germany and Belgium. They are working hard to make their facilities ready to produce microchips with our newest EUV machines, therefore our team will be busy with Installing, Upgrading and Relocating systems throughout the following years.
This program consist of 3 phases. First two phases of one year and the last one indefinitely.

 

Phase 1: One-year international training program

Given the complexity of our machines you will first get an international one-year training program. You will be trained to learn all the details to make sure you can fully integrate our team and gain knowledge on the newest EUV machines. A part of the training program will be done in our locations around the world, (sites can be found in Asia (Taiwan), USA and other European countries). Every site that is already equipped with EUV machines is a potential site where you will be able to get on-the-job training.

 

Phase 2: Install, Upgrade and Relocate EUV machines
New EUV machines needs to be installed on sites, Current running machines sometimes needs to be upgraded and de-installed to be shipped to other locations, it's our teams job to make sure it all goes according the timelines set by the customer, following all safety and site requirements and be ready for any help requests that might be needed from other departments, 

 

Within System Install (SIE) there are different specializations for an engineer. Based on your background and preferences we will match you to a specific specialization:   

The pre-install team. They make sure that within the factory of the customer everything is in place before the machine arrives, including facilitating the requirements. The mechanical install engineer will be onsite with the customer when the de-assembled machine arrives. Within approximately a time span of 3 weeks the machine will be assembled. Hands-on skills are highly preferred. The machine will be moved in, unpacked, unlocked and all modules mechanically installed. The system will be powered on and checked how everything works, to diagnose faults and solve system failures.Then the last type of system install engineer will follow and begins the integration and qualification process. Main focus is calibrating and testing the system including system acceptance test, plus fault diagnose and solving system failures. When all tests prove the agreed performance, the install is done and the customer support team will take over.

 

Phase 3: Continue career development

When all the machines are installed and running, there are opportunities to continue your career path in support of customers around Europe and elsewhere, Alternatively there will also be opportunities to become an EUV expert: where you know all the in’s-and-out’s of our equipment, or you can grow from the role of system install engineer to the role of Generalist, Expert, Coordinator, Shift lead and other exciting technical development paths.

 

This position requires access to controlled technology, as defined in the Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.

 

Role and responsibilities

Problem analysis and approach

Gather all information relevant for the problem, analyze using available means, gather additional diagnostic info if needed, decide on initial approach to solve problem and execute, consult with others.

 

Problem handovers and routing

Handover problem or problem aspects to others (2nd line support), document and package all data relevant for problem resolution.

 

Installation

Install equipment at customers locations.

 

Upgrade

Execute hardware installation and perform system setup/recovery for upgrade packages. Provide feedback during execution in order to improve cycle time and performance.

 

Relocations

De-Install equipment at customers locations, unload components, inspect for damage, Disassemble, Document all relevant information and transfer along with the machine.

 

Process Optimization

Signal gaps and improvement opportunities and reports it to the relevant stakeholders

 

Training / advice

Explain appropriate actions to users to correct malfunctions, train customers in use and routine maintenance of equipment, recommend changes in user procedures when needed.

 

Knowledge build-up and transfer

Maintain and broaden own knowledge, shares best known methods within the work group.

 

Coaching

Provide appropriate support and assistance to less experienced engineers on first tasks.

 

Education and experience

A Bachelor or Master degree in a technical related study. Preferably (but not exclusively) in Mechanical Engineering, Aerospace Engineering, Electronics, Physics, Mechatronics.

 

Skills

Excellent communication skills with a focus in understanding , supporting and influencing others.Safety first mentalityQuality “first time right” philosophy.Passion for hands on engineering challengesDetail orientation without losing track of the bigger pictureSelf steeringGood team player

 

Other information

Shift schedule:

You will work in a 12-hour shift schedule (24/7),  with attractive shift allowances and overtime compensation for our shift structure.

 

Travel:

Initially > 80% international travel (Required for training),
Once qualified > up to 70%

 

EOE AA M/F/Veteran/Disability

 

Need to know more about applying for a job at ASML? Read our frequently asked questions.

This position requires access to controlled technology, as defined in the United States Export Administration Regulations (15 C.F.R. § 730, et seq.). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. Business demands may require ASML to proceed with candidates who are immediately eligible to access controlled technology.

Diversity and inclusion

ASML is an Equal Opportunity Employer that values and respects the importance of a diverse and inclusive workforce. It is the policy of the company to recruit, hire, train and promote persons in all job titles without regard to race, color, religion, sex, age, national origin, veteran status, disability, sexual orientation, or gender identity. We recognize that diversity and inclusion is a driving force in the success of our company.

Need to know more about applying for a job at ASML? Read our frequently asked questions.