We have partnered with NASA to support space flight programs for more than 40 years. While the majority of work is directly in support of LaRC, other industry partners and Government agencies may be supported at remote sites as directed by the Contracting Officer (CO). The Center Maintenance, Operations, and Engineering (CMOE) contract comprises of three major categories of work – operations, maintenance, and engineering (OME), as described below. •Maintenance – Research and institutional facility maintenance includes, but not limited to, preventive maintenance, trouble calls, repairs, Reliability Centered Maintenance (RCM), Facility Condition Assessment (FCA), and maintenance/operation of central utilities (e.g., electrical power distribution, potable water, storm water drainage) •Operations – Facilities Operations support includes, but not limited to, wind tunnels, laboratories, and test stands testing, instrumentation calibration/repair; plant and utilities (e.g., high pressure air, Liquid Nitrogen (LN2) and Steam Plant); technology development and administration, including, but not limited to, Facility Automation Systems (FAS) and Data Acquisition Systems (DAS) •Engineering – Facility engineering includes, but not limited to, engineering studies, design, construction, construction management, configuration management, tactical engineering, pressure system recertification, project management/planning support
Responsibilities\:
The successful candidate will join a team to support maintenance activities at NASA LaRC. This work will include identification of repeated causes of failure in support of root cause failure analysis and equipment lifecycle assessments (to include nameplate data verification and failure reporting), as well as electrical equipment/system field verification. Shall follow safety policies and procedures and perform all work according to existing policies and procedures while maintaining a high standard of quality and workmanship in performing the duties. (OSHA Lockout/ Tagout program) is an added advantage. Experience in operating and maintaining electrical distribution systems and/or control circuitry is desirable. Will perform field verification of equipment information as well as failure reporting and other reliability related tasks. Must be able to read relevant technical drawings and specifications. Relevant military training or aviation maintenance training is a plus.
We have partnered with NASA to support space flight programs for more than 40 years. While the majority of work is directly in support of LaRC, other industry partners and Government agencies may be supported at remote sites as directed by the Contracting Officer (CO). The Center Maintenance, Operations, and Engineering (CMOE) contract comprises of three major categories of work – operations, maintenance, and engineering (OME), as described below. •Maintenance – Research and institutional facility maintenance includes, but not limited to, preventive maintenance, trouble calls, repairs, Reliability Centered Maintenance (RCM), Facility Condition Assessment (FCA), and maintenance/operation of central utilities (e.g., electrical power distribution, potable water, storm water drainage) •Operations – Facilities Operations support includes, but not limited to, wind tunnels, laboratories, and test stands testing, instrumentation calibration/repair; plant and utilities (e.g., high pressure air, Liquid Nitrogen (LN2) and Steam Plant); technology development and administration, including, but not limited to, Facility Automation Systems (FAS) and Data Acquisition Systems (DAS) •Engineering – Facility engineering includes, but not limited to, engineering studies, design, construction, construction management, configuration management, tactical engineering, pressure system recertification, project management/planning support
Responsibilities\:
The successful candidate will join a team to support maintenance activities at NASA LaRC. This work will include identification of repeated causes of failure in support of root cause failure analysis and equipment lifecycle assessments (to include nameplate data verification and failure reporting), as well as electrical equipment/system field verification. Shall follow safety policies and procedures and perform all work according to existing policies and procedures while maintaining a high standard of quality and workmanship in performing the duties. (OSHA Lockout/ Tagout program) is an added advantage. Experience in operating and maintaining electrical distribution systems and/or control circuitry is desirable. Will perform field verification of equipment information as well as failure reporting and other reliability related tasks. Must be able to read relevant technical drawings and specifications. Relevant military training or aviation maintenance training is a plus.
U.S. Citizenship required. Must be able to obtain and maintain a security clearance as required. Two (2) years of college with courses in engineering, mathematics, or science, and four (4) years relevant experience, or any equivalent combination of relevant education/experience for a total of six (6) years.
Essential Functions
Physical Requirements\:
Must have sufficient mobility to enter confined spaces, crawl into or onto various assemblies while maintaining a clear vision of safety is required. Potential exposure to high noise levels, hazardous chemicals, propellants and the like. Appropriate PPE and training will be provided for all conditions. Must be able to walk, stand, bend, twist and sit for extended periods as well as climb, crawl, and lift up to 35 lbs. (field work will constitute 30%)
Work Environment\:
Office Environment (65%). Test/Industrial Environment - May be exposed to areas of high noise levels, high energy sources, hazardous propellants, explosives, chemicals, and industrial facilities. (30%) Travel between facilities and during test operations may be required and may bring exposure to loud noise and potentially hazardous equipment and chemical operations (5%).
Equipment and Machines\:
Facility operations display/keyboards/mechanical/electrical control/HMI, standard office equipment (PC, telephone, fax, copier, etc.) (65%) Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, and quality control.
Attendance\:
Regular attendance mandatory (100%)
Partial telework options (up to 2 days a week) available through manager request.
Overtime/work outside normal schedule required (10%)
Other Essential Functions\:
U.S. Citizenship required. Valid Driver’s License required Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety/risk hazard to the employee or others. The job position requires the ability to cooperate and work with individuals at all levels of the company and the client.
*U.S. Citizenship required. Must be able to obtain and maintain a security clearance as required. Two (2) years of college with courses in engineering, mathematics, or science, and four (4) years relevant experience, or any equivalent combination of relevant education/experience for a total of six (6) years.
Essential Functions
Physical Requirements\:
Must have sufficient mobility to enter confined spaces, crawl into or onto various assemblies while maintaining a clear vision of safety is required. Potential exposure to high noise levels, hazardous chemicals, propellants and the like. Appropriate PPE and training will be provided for all conditions. Must be able to walk, stand, bend, twist and sit for extended periods as well as climb, crawl, and lift up to 35 lbs. (field work will constitute 30%)
Work Environment\:
Office Environment (65%). Test/Industrial Environment - May be exposed to areas of high noise levels, high energy sources, hazardous propellants, explosives, chemicals, and industrial facilities. (30%) Travel between facilities and during test operations may be required and may bring exposure to loud noise and potentially hazardous equipment and chemical operations (5%).
Equipment and Machines\:
Facility operations display/keyboards/mechanical/electrical control/HMI, standard office equipment (PC, telephone, fax, copier, etc.) (65%) Sets up and conducts tests of complete units and components under operational conditions to investigate design proposals for improving equipment performance or other factors, or to obtain data for development, standardization, and quality control.
Attendance\:
Regular attendance mandatory (100%)
Partial telework options (up to 2 days a week) available through manager request.
Overtime/work outside normal schedule required (10%)
Other Essential Functions\:
U.S. Citizenship required. Valid Driver’s License required Must be able to work in a team atmosphere. Must put forward a professional behavior that enhances productivity and promotes teamwork and cooperation. Grooming and dress must be appropriate for the position and must not impose a safety/risk hazard to the employee or others. The job position requires the ability to cooperate and work with individuals at all levels of the company and the client.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.