Summary You will serve as an ENGINEER in the Logistics and Life Cycle Engineering Department of NIWC ATLANTIC. Responsibilities You will provide on-site technical support to existing equipment, installation and conversion of new equipment, and logistical support to Local Navy Authority and government contractors. You will complete highly difficult and complex survey work. You will develop and provide technical input to plans and solutions for equipment installation, integration and interoperability, risk management and mitigation, work estimates and work schedules. You will communicate with technical leaders to plan, install, monitor, and test highly complex and technical electronic systems supporting Information Warfare capabilities and missions within established recommendations to DoD and DON policies. You will apply a wide range of technical engineering methods, principles, requirements, work techniques, practices in area of installation specialization, and skill in applying standardized, analytical, evaluative methods and techniques You will perform installation, operation, operational research and testing duties of custom equipment, developmental equipment, or equipment which is continually being modified and adapted. You will communicate with customers, Leadership, technical leaders, and managers to plan, install, monitor, test and evaluate highly complex and technical electrical/electronic systems supporting Information Warfare capabilities. You will perform installation, operation, operational research and testing duties; employ specially designed instruments and equipment which is continually being modified and adapted and does not usually have adequate documentation. You will make recommendations to DoD and DoN policies, process, and procedures; independently/as part of a team. Requirements Conditions of Employment Qualifications Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to the Basic Education Requirements for this position, your resume must also demonstrate at least one year of specialized experience at the ND-03 grade level or pay band in the Federal service or equivalent experience in the private or public sector as a Professional Engineer. Specialized experience must demonstrate the following: 1) Developing architectures, installation designs and integration of Information technology systems (including a wide range of ashore network technology & applications and installation requirements & processes, to include Shore Installation Process Handbook M-4720.1. and natural follow ons; 2) Applying shore installation processes (e.g., the Shore Installation Process Handbook) to system design, site surveys, development, acquisition, documentation, scheduling, installations, system cut-over, System Operational Verification and Test (SOVT), and system turnover; and 3) Applying installation tasks (e.g., cabling, conduit, terminations, configuration, loading, patching & similar) to demonstrate or determine viability of concepts & designs, to include novel, experimental or prototype equipment or systems. 4) Collaborating across Gov't/Contractor boundaries & with different Commands to build & foster teams to accomplish overall objectives related to ship & shore modernization & maintenance. NOTE: This information must be supported in your resume to be considered for this position. Additional qualification information can be found from the following Office of Personnel Management website: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF and https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/all-professional-engineering-positions-0800/ Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. ADDITIONAL INFORMATION: The office of the Secretary of Defense (Personnel and Readiness) limits the number of Bahrain base DoD personnel accompanied tours. Dependent entry approval from Commander, U.S. Naval Forces Central Command is required for all accompanied tours prior to extending the final job offer and prior to issuing Permanent Change of Station (PCS) orders. Accompanied tours are not guaranteed. During the application process you will have an option to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Relocation and recruitment incentives up to 25% may be authorized. The current workweek is Sunday through Thursday. Employees hired from continental U.S. will receive Sunday Premium Pay (computed at 25% of basic hourly rate, eight hours per week). Education Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not allinclusive.) Education completed in foreign colleges or universities may be used to meet the qualification requirements if the applicant can provide documentation indicating that the foreign education is comparable to that received in an accredited educational institution in the United States. It is the responsibility of the applicant to provide such evidence when applying. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html Additional Information This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs. Additional vacancies may be filled by this announcement. Pay retention may be granted when certain conditions are met. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf Tour of duty will be 18 months Unaccompanied or 24 months accompanied. . Accompanied tours are not guaranteed. To learn more about the living and working conditions at this military installation and additional Foreign Overseas information, please go to: https://www.secnav.navy.mil/donhr/Overseas/Pages/default.aspx Priority consideration will be given to military spouse preference and family member preference eligible residing in the commute area of the duty location for this position. Commute area is defined as the geographic area surrounding the duty location in which people can reasonably be expected to travel back and forth daily. Military Spouses and Family Members may apply 30 days before their anticipated arrival date. However, they will not receive preference until arrival at the foreign location. Additional documentation may be required prior to granting preference. Military spouses and family members who are appointed may not extend longer than 2 months following the transfer of the sponsor from the commuting area of the foreign duty station; 2 months beyond the separation of the appointee's sponsor; or any time beyond the time employee ceases to be a family member. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/