*

Machine Design – Engineer I

Amentum Technology Group is a performance unit of our Engineering & Technology (E&T) Line of Business.  The Amentum Technology Group specializes in the design, construction, and operation of unique and complex research and development facilities, including, as examples, wind tunnels (aerospace, automotive, and motorsports), rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities.  Our projects span the automotive, motorsports, defense, nuclear, and aerospace markets.  Recent clients include Audi, Boeing, BMW, Fiat Chrysler, Ford, Honda, General Motors, NASA, U.S. Air Force, U.S. Navy, U.S. Department of Energy, Volkswagen, and many others in North America, Europe, and Asia.

Our capabilities and some recent project photos and videos can be found in downloadable files at https\://jtftp.jacobstechnology.com/.  Use “anontg” as both the user name and password.

Most of your designs will be unique, and you will usually be working on several projects at one time in a dynamic, challenging, and even fun environment.  Many designs are “blank sheet of paper,” with few analogs or comparisons. This position will provide you with an exciting opportunity to join Machine Design projects as part of a multi-discipline team of professionals. We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership.

Duties and Responsibilities\:

Projects are often complex and multi-discipline. For each assignment, Entry Level Engineers will be issued specific objectives, approaches, and possible solutions by a supervising engineer.  The Entry Level Engineer\:

Independently performs short duration project tasks with clearly defined requirements and goals. Analyzes and/or evaluates the results of an analysis using techniques prescribed by senior engineers or supervisors. Accomplishes, complete tasks of limited scope or solves problems which require investigation of a limited number of variables. Prepares calculations, and assists in the preparation of, presentations and technical reports. Supports interface development with other disciplines, working closely with structural, mechanical process, controls and instrumentation, and aerodynamics/fluid dynamics engineers. Aids in the production of complete, detailed drawing packages, by supplying design input or performing CAD work. *

Machine Design – Engineer I

Amentum Technology Group is a performance unit of our Engineering & Technology (E&T) Line of Business.  The Amentum Technology Group specializes in the design, construction, and operation of unique and complex research and development facilities, including, as examples, wind tunnels (aerospace, automotive, and motorsports), rocket test stands, climatic chambers, jet engine test cells, acoustic chambers, altitude test facilities, captive trajectory systems, and nuclear facilities.  Our projects span the automotive, motorsports, defense, nuclear, and aerospace markets.  Recent clients include Audi, Boeing, BMW, Fiat Chrysler, Ford, Honda, General Motors, NASA, U.S. Air Force, U.S. Navy, U.S. Department of Energy, Volkswagen, and many others in North America, Europe, and Asia.

Our capabilities and some recent project photos and videos can be found in downloadable files at https\://jtftp.jacobstechnology.com/.  Use “anontg” as both the user name and password.

Most of your designs will be unique, and you will usually be working on several projects at one time in a dynamic, challenging, and even fun environment.  Many designs are “blank sheet of paper,” with few analogs or comparisons. This position will provide you with an exciting opportunity to join Machine Design projects as part of a multi-discipline team of professionals. We are looking for an entry-level or early career Mechanical Engineer with strong technical skills, academic achievement, and sense of ownership.

Duties and Responsibilities\:

Projects are often complex and multi-discipline. For each assignment, Entry Level Engineers will be issued specific objectives, approaches, and possible solutions by a supervising engineer.  The Entry Level Engineer\:

Independently performs short duration project tasks with clearly defined requirements and goals. Analyzes and/or evaluates the results of an analysis using techniques prescribed by senior engineers or supervisors. Accomplishes, complete tasks of limited scope or solves problems which require investigation of a limited number of variables. Prepares calculations, and assists in the preparation of, presentations and technical reports. Supports interface development with other disciplines, working closely with structural, mechanical process, controls and instrumentation, and aerodynamics/fluid dynamics engineers. Aids in the production of complete, detailed drawing packages, by supplying design input or performing CAD work. *

Minimum Experience/Education\:

B.S.M.E. from an accredited engineering school

Key Skills\:

Coursework\: Statics & Dynamics Mechanics of Materials Mechanisms/Machine Design Kinematics Fluid Dynamics Thermodynamics Heat Transfer System Dynamics 3D CAD Strong sense of ownership and pride in execution of work Mechanical intuition

Preferred Qualifications\:

Mechanical Engineering Internships and/or Co-ops, particularly in Machine Design or adjacent industries (see below) 3D CAD experience; Inventor and/or Solidworks preferred FEA software experience; Ansys, NASTRAN, and/or Inventor preferred Machining and fabrication experience (milling, turning, welding, laser-cutting, forming, etc.) Basic experience with machine instrumentation (proximity sensors, vision sensors, strain gauges, scales, etc.) Knowledge and experience of common machine elements\: gears, bearings, belts, machine screws, chains, cams, linkages, gearmotors, servomotors, etc.

Adjacent Industries

Aerospace & Defense Mechanical Design Factory Automation (material handling, web handling, process automation, etc.) Fluid Power (Hydraulics/Pnumatics)

Essential Functions

Special clothing/equipment (wearing)\: 1%

High noise level\: 1%

Description of work environment - Inside - 99%, Outside - 1%

Travel/transportation requirements\: 1-3 days per quarter

Equipment and machines used\:  Office equipment - 100%

*

Minimum Experience/Education\:

B.S.M.E. from an accredited engineering school

Key Skills\:

Coursework\: Statics & Dynamics Mechanics of Materials Mechanisms/Machine Design Kinematics Fluid Dynamics Thermodynamics Heat Transfer System Dynamics 3D CAD Strong sense of ownership and pride in execution of work Mechanical intuition

Preferred Qualifications\:

Mechanical Engineering Internships and/or Co-ops, particularly in Machine Design or adjacent industries (see below) 3D CAD experience; Inventor and/or Solidworks preferred FEA software experience; Ansys, NASTRAN, and/or Inventor preferred Machining and fabrication experience (milling, turning, welding, laser-cutting, forming, etc.) Basic experience with machine instrumentation (proximity sensors, vision sensors, strain gauges, scales, etc.) Knowledge and experience of common machine elements\: gears, bearings, belts, machine screws, chains, cams, linkages, gearmotors, servomotors, etc.

Adjacent Industries

Aerospace & Defense Mechanical Design Factory Automation (material handling, web handling, process automation, etc.) Fluid Power (Hydraulics/Pnumatics)

Essential Functions

Special clothing/equipment (wearing)\: 1%

High noise level\: 1%

Description of work environment - Inside - 99%, Outside - 1%

Travel/transportation requirements\: 1-3 days per quarter

Equipment and machines used\:  Office equipment - 100%

*Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans  and Labor Laws Posters.