Summary This position is located at the Phoenix Indian Medical Center (PIMC) in Phoenix, Arizona, within the Division of Administrative and Engineering Services. This position is responsible for performing review and approval of contractor plans for accomplishing, detailed scope descriptions, detailed schedules, risk management approach, milestone descriptions, gathers and analyzes energy use data and prepares energy use reports and serves as the technical expert for PIMC mechanical and utility systems. Responsibilities **This position is being announced concurrently under Excepted Service Examining Plan/Merit Promotion Plan (ESEP/MPP) procedures. Please review vacancy announcement number IHS-25-PX-12655927-ESEP/MP; for eligibility requirements. NOTE: Applicants must apply separately for each announcement in order to be considered.** Provide continuous advisory services for the mechanical and utility systems of the hospital and adjacent campus buildings to the Director of Engineering Services. Assignments pertaining to the repair and improvement of real property buildings, land, and structures for hospitals, clinics, office buildings and warehouses. Perform and document code reviews, risk assessments, cost assessments, life-cycle planning, and heating ventilations air conditioning (HVAC) engineering design as requested by Director of Engineering Services. Assignments involve major building systems including heating, ventilation, air conditioning, plumbing, fire protection, architectural systems, electrical distribution and medical gases. Provide expert advice on the purchasing of proper equipment for facility mechanical system in-house projects. Performs energy and life cycle-costs analysis of mechanical systems and equipment. Responsible for performing the duties as a Contracting Officer Representative (COR) on professional design, mechanical and utility service contracts/projects, training service staff on technical issues and assisting the service staff on the completion of technical and administrative issues regarding infrastructure related operations of the medical facility. Assist the Director of Engineering Services with engineering department policy development, policy maintenance, and policy training. Provide guidance to managers and program officials on comprehensive management policies and procedures, including the actions to accomplish the work in alignment with established requirements. Requirements Conditions of Employment Must pass pre-employment examination. Selectee may be subject to a probationary period U.S. Citizenship is required Selective Service Registration is required for males born after 12/31/1959 This is a designated position covered by Public Law 101-630, requiring contact or control over Indian children. Due to this requirement, the agency must ensure that persons hired for these positions have not been found guilty of or pleaded nolo contendere or guilty to certain crimes. Confidential Financial Disclosure Form required. Adherence to the IHS Employee Immunization Policy, SGM 21-04, and the IHS Circular 2016-04 requiring Measles and Rubella, COVID-19, and seasonal influenza immunizations for staff working in Indian Health Service health care facilities OR an exemption request will need to be submitted. Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/. You will need to set up direct deposit so we can pay you. Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process. Qualifications To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. BASIC REQUIREMENT(S): A. Degree in Engineering: To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition, to the Basic Requirements, you must also meet the Minimum Qualifications stated below- MINIMUM QUALIFICATIONS: Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the GS-12 grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks: Applying professional knowledge in mechanical engineering including design, fluid dynamics, manufacturing processes, machine design, thermodynamics, and heat transfers; Conduct precise engineering calculations to assess various challenges such as heat loss, required capacities, life safety compliance, size of piping, etc.; Prepare comprehensive reports and engineering statements of work for facilities undergoing modification or repair and drafting other written documents of increasing complexity; Apply facility inspection methods and procedures in order to identify existing or potential facilities deficiencies and ensure that corrective action is taken; Provide expert consultation and advice on mechanical engineering science matters, effectively addressing relevant concerns and issues. You must meet all qualification requirements within 30 days of the closing date of the announcement. Education This position has an education requirement. You are strongly encouraged to submit a copy of your transcripts or a list of your courses including titles, credit hours completed, and grades. Unofficial transcripts will be accepted in the application package. Official transcripts will be required from all selectees prior to receiving an official offer. Only attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education may be credited. Applicants can verify accreditation at the following website: https://www.ed.gov/accreditation. If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit https://sites.ed.gov/international/recognition-of-foreign-qualifications/. Additional Information Additional selection(s) of candidates may be possible within 240 days from the date the certificate of eligibles was issued for this announcement. Federal Employees earn annual leave at a rate (4, 6 or 8 hours per pay period) which is based on the number of years they have served as a Federal employee. IHS may offer newly-appointed Federal employees credit for their directly related previous non-federal experience or active duty uniformed military service. This credited service can be used in determining the rate at which they earn annual leave. This position is covered by a Bargaining Unit. Relocation Incentives may be authorized and is subject to availability and service unit approval. If offered, you will be required to sign a one (1) year service agreement. Failure to fulfill the service agreement will result in repayment of the incentive. This position meets the criteria specified in pillar number one of the five pillars of the PHS Commissioned Corps. PHS Commissioned Officers interested in performing the duties of this position within the Commissioned Corps MUST apply online under the merit promotion announcement indicated above in order to receive consideration. For more information on PHS Commissioned Corps, visit the website at: https://www.usphs.gov/. This position has no promotion potential.