ESSENTIAL TASKS: Train for 3 months. Receive 40 hours of classroom training and receive hands on instruction. Learn to operate all instruments and test systems. Learn to read technical instructions and mill instructions. Written and practical examinations will be administrated after 3 months training. Upon passing results, will reach level I. Level I: Continue training in the above tasks. Must be able to make specific calibrations of all test systems according to procedures. Must be able to verify that equipment is calibrated. Will be able to operate the equipment under the direct supervision of a Level II. Will receive 40 hours of classroom training to perform all techniques necessary to become a Level II inspector including immersion testing (nuclear and non-nuclear) and contact testing (nuclear and non-nuclear). After 12 months and no more than 14 months experience since the beginning of training written and practical examinations will be administered. Failure to pass the examination on the third attempt will disqualify that person to be Level II and will require assignment to another job if available and qualified. Level II: Will be able to operate all equipment and systems, in all techniques (immersion, contact, longitudinal, shear wave, nuclear and non-nuclear). Will be able to accept or reject indications, perform calibrations, and work to all procedures as required. Should be able to organize and report inspection results in a thorough manner. Must be thoroughly familiar with the scope and limitations of the techniques for which the individual is qualified and must be able to apply those techniques as required. Requalification will be every three years by written and practical examination as required by T.I. QC-20 addenda 1 and 2. Failure to requalify on 3rd attempt will result in the same actions as above. An employee must work in the position for a minimum of two years to be eligible for job posting. Beginning pay is four steps below job rate instead of the standard two. If interviewed for position details will be explained. NON-ESSENTIAL TASKS: As required or directed, perform receiving inspection Proven to Perform . From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us.