Responsibilities:
? Responsible for SBM machine processing systems within appropriate process guidelines; ... ? Responsible for working with the shift to maximize production requirements
? Insures that the quality of all products produced meet the customer?s specifications;
? Reviews daily production performance to insure that the department is meeting efficiency goals;
? Serves as an example for housekeeping and safety standards;
? Works with maintenance staff to ensure that mechanical issues are corrected.
? Responsible for maintaining the Food Safety Program (GMP)
? Other duties as assigned
Working hours: 7:00 PM - 7:00 AM
Skills:
- Manual Dexterity -- The ability to quickly move hand, hand together with arm, or two hands to grasp, manipulate, or assemble objects.
- Mechanical aptitude -Strong mechanical aptitude with demonstrated knowledge of troubleshooting and basic mechanical repairs.
- Forklift certification - The ability to operate a forklift in a safe manner consistent with OSHA standards
- Information Ordering -- The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
- Near Vision -- The ability to see details at close range (within a few feet of the observer).
- Extent Flexibility -- The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
- Wrist-Finger Speed -- The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
- Multilimb Coordination -- The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
- Lifting Requirements -- Ability to lift 30 pounds over head to total height of six feet
- Walking/Standing---Requirements ability to walk and or stand for 12 hours per day.
Education:
High School
Experience:
1-4 years
Qualifications:
? Can verify quality of finished product (measure/visual to control plan) and properly react to problem
? Demonstrates working knowledge of dryers and reacts to ?out of control? conditions
? Understands and demonstrates proper safety procedures (LOTO, safety block usage, proper propane torch usage, the opening of safety latch door for 2nd safety, etc.)
? Can verify barrel heats, nozzle heats, and hot runner heats to process document and identify an actual temperature outside of 5 degrees of set point.
? Can verify actual injection pressures by gage to Process Sheet
? Demonstrates proper Daily PM compliance with all paperwork completed
? Demonstrates proper/safe ?purging?
? Demonstrates proper Burn out procedures (gates and sprue bushing)
? Can start all SBM press from cold (verifies all water is turned on, heats on, dryer on, air on)
? Can stop all presses and perform all proper shutdown procedures
? Can remove a short shot from an injection core and cavity using brass tools
? Can identify a quality problem by neck ring, cavity, and injection core
? Can troubleshoot and correct daily processing problems (bubbles, strings, contamination, holes, etc.)
? Can verify actual cycle time variation and reacts to ?out of control? situations
? Can verify air pressures by gage, water temp by gage, and water pressure by gage
? Can detect a water leak at the molds and nozzle and react correctly
? Can detect an oil leak within the machine (shut-off nozzle, hydraulic line, rotary seal) and prevent product contamination
? Can detect an air leak a
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).
Responsibilities:
? Responsible for SBM machine processing systems within appropriate process guidelines;
? Responsible for working with the shift to maximize production requirements
? Insures that the quality of all products produced meet the customer?s specifications;
? Reviews daily production performance to insure that the department is meeting efficiency goals;
? Serves as an example for housekeeping and safety standards;
? Works with maintenance staff to ensure that mechanical issues are corrected.
? Responsible for maintaining the Food Safety Program (GMP)
? Other duties as assigned
Working hours: 7:00 PM - 7:00 AM
Skills:
- Manual Dexterity -- The ability to quickly move hand, hand together with arm, or two hands to grasp, manipulate, or assemble objects.
- Mechanical aptitude -Strong mechanical aptitude with demonstrated knowledge of troubleshooting and basic mechanical repairs. ... - Forklift certification - The ability to operate a forklift in a safe manner consistent with OSHA standards
- Information Ordering -- The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
- Near Vision -- The ability to see details at close range (within a few feet of the observer).
- Extent Flexibility -- The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
- Wrist-Finger Speed -- The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
- Multilimb Coordination -- The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
- Lifting Requirements -- Ability to lift 30 pounds over head to total height of six feet
- Walking/Standing---Requirements ability to walk and or stand for 12 hours per day.
Education:
High School
Experience:
1-4 years
Qualifications:
? Can verify quality of finished product (measure/visual to control plan) and properly react to problem
? Demonstrates working knowledge of dryers and reacts to ?out of control? conditions
? Understands and demonstrates proper safety procedures (LOTO, safety block usage, proper propane torch usage, the opening of safety latch door for 2nd safety, etc.)
? Can verify barrel heats, nozzle heats, and hot runner heats to process document and identify an actual temperature outside of 5 degrees of set point.
? Can verify actual injection pressures by gage to Process Sheet
? Demonstrates proper Daily PM compliance with all paperwork completed
? Demonstrates proper/safe ?purging?
? Demonstrates proper Burn out procedures (gates and sprue bushing)
? Can start all SBM press from cold (verifies all water is turned on, heats on, dryer on, air on)
? Can stop all presses and perform all proper shutdown procedures
? Can remove a short shot from an injection core and cavity using brass tools
? Can identify a quality problem by neck ring, cavity, and injection core
? Can troubleshoot and correct daily processing problems (bubbles, strings, contamination, holes, etc.)
? Can verify actual cycle time variation and reacts to ?out of control? situations
? Can verify air pressures by gage, water temp by gage, and water pressure by gage
? Can detect a water leak at the molds and nozzle and react correctly
? Can detect an oil leak within the machine (shut-off nozzle, hydraulic line, rotary seal) and prevent product contamination
? Can detect an air leak a
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including health, and an incentive and recognition program (all benefits are based on eligibility).
? Responsible for SBM machine processing systems within appropriate process guidelines;? Responsible for working with the shift to maximize production requirements? Insures that the quality of all products produced meet the customer?s specifications;? Reviews daily production performance to insure that the department is meeting efficiency goals;? Serves as an example for housekeeping and safety standards;? Works with maintenance staff to ensure that mechanical issues are corrected.? Responsible for maintaining the Food Safety Program (GMP)? Other duties as assigned
experience1-4 years
skills- Manual Dexterity -- The ability to quickly move hand, hand together with arm, or two hands to grasp, manipulate, or assemble objects.- Mechanical aptitude -Strong mechanical aptitude with demonstrated knowledge of troubleshooting and basic mechanical repairs.- Forklift certification - The ability to operate a forklift in a safe manner consistent with OSHA standards- Information Ordering -- The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).- Near Vision -- The ability to see details at close range (within a few feet of the observer).- Extent Flexibility -- The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.- Wrist-Finger Speed -- The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.- Multilimb Coordination -- The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.- Lifting Requirements -- Ability to lift 30 pounds over head to total height of six feet- Walking/Standing---Requirements ability to walk and or stand for 12 hours per day.
qualifications? Can verify quality of finished product (measure/visual to control plan) and properly react to problem? Demonstrates working knowledge of dryers and reacts to ?out of control? conditions? Understands and demonstrates proper safety procedures (LOTO, safety block usage, proper propane torch usage, the opening of safety latch door for 2nd safety, etc.)? Can verify barrel heats, nozzle heats, and hot runner heats to process document and identify an actual temperature outside of 5 degrees of set point.? Can verify actual injection pressures by gage to Process Sheet? Demonstrates proper Daily PM compliance with all paperwork completed? Demonstrates proper/safe ?purging?? Demonstrates proper Burn out procedures (gates and sprue bushing)? Can start all SBM press from cold (verifies all water is turned on, heats on, dryer on, air on)? Can stop all presses and perform all proper shutdown procedures? Can remove a short shot from an injection core and cavity using brass tools? Can identify a quality problem by neck ring, cavity, and injection core? Can troubleshoot and correct daily processing problems (bubbles, strings, contamination, holes, etc.)? Can verify actual cycle time variation and reacts to ?out of control? situations? Can verify air pressures by gage, water temp by gage, and water pressure by gage? Can detect a water leak at the molds and nozzle and react correctly? Can detect an oil leak within the machine (shut-off nozzle, hydraulic line, rotary seal) and prevent product contamination? Can detect an air leak and identify general location (air line, blow mold obstruction, etc.)
educationHigh School