TITLE
Calibration Technician 2
COMPANY LOCATION
Wellington, KS
REPORTS TO
Director of Quality
DEPARTMENT NAME
Quality
DEPT#
2170
JOB FAMILY
Tech-Calibration, Assoc
FLSA STATUS
FORMCHECKBOX FFFFFFFF6500000014000000000001000000000000000000000000000000000000000000 Non-Exempt FORMCHECKBOX FFFFFFFF6500000014000000000000000000000000000000000000000000000000000000 Exempt
JOB CODE
QACAHR2_02
JOB GRADE
SALARY RANGE
Negotiable
Position Summary
Calibration Technicians at this level can calibrate higher-level equipment and calibrate equipment across the following disciplines, (e.g., Electrical, Dimensional, Flow, or Pressure). A Calibration Technician 2 will be capable of completing work independently within the lab with limited or no guidance.
Essential Duties and Responsibilities
§ Monitors and performs Calibration tasks in accordance with internal procedures and FAA requirements
§ Conducts incoming inspection prior to calibration on measuring equipment and tools
§ Verifies and calibrates various equipment and tools in accordance internal procedures and FAA requirements
§ Applies and adheres to relevant calibration regulations to ensure the equipment is safe, accurate and operational
§ Implements best practices and develops high bench marking activities
§ Ensures all required equipment and standards on site are calibrated and appropriately labeled
§ Maintains records of calibration, and assures that all linear instruments in use are within the acceptable calibration period
§ Issues notices when measurement media failed to be recalled to ensure non-usage by inspection and/or manufacturing personnel
§ Organizes equipment calibration with minimum disruption to the users
§ Performs other duties as assigned
Qualifications / Education
§ Successful completion of assigned training materials through on-the-job training, online content, and classroom led instruction
§ Strong interpersonal and customer service skills
§ Excellent attention to detail
§ Self-motivated learner with the ability to learn new skills related to calibration and calibration processes
§ Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team
§ 3 years driving experience with a valid driver’s license
§ Qualified to meet the requirements of 14CFR 145.155
Education
§ Associates degree from college or technical school, or 3 years related experience and/or training, or combination of education and experience
§ Three (3 ) years of commercial calibration experience
§ Previous experience or training in electronics or machining
§ Basic mathematical skills including algebra, geometry, and statistics
§ Basic organizational and time management skills
§ Proficiency with Microsoft Office computer software including Word, Excel, and Outlook
§ Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics, LabVIEW / Automation Calibration Software, multimeters, Fluke 5522A
§ Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process
Special Requirements
§ Occasionally will be required to lift up to 75 lbs.
§ Employee is often required to site or use their hands and fingers to handle tools and equipment
§ The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.
TITLE
Calibration Technician 2
COMPANY LOCATION
Wellington, KS
REPORTS TO
Director of Quality
DEPARTMENT NAME
Quality
DEPT#
2170
JOB FAMILY
Tech-Calibration, Assoc
FLSA STATUS
FORMCHECKBOX FFFFFFFF6500000014000000000001000000000000000000000000000000000000000000 Non-Exempt FORMCHECKBOX FFFFFFFF6500000014000000000000000000000000000000000000000000000000000000 Exempt
JOB CODE
QACAHR2_02
JOB GRADE
SALARY RANGE
Negotiable
Position Summary
Calibration Technicians at this level can calibrate higher-level equipment and calibrate equipment across the following disciplines, (e.g., Electrical, Dimensional, Flow, or Pressure). A Calibration Technician 2 will be capable of completing work independently within the lab with limited or no guidance.
Essential Duties and Responsibilities
§ Monitors and performs Calibration tasks in accordance with internal procedures and FAA requirements
§ Conducts incoming inspection prior to calibration on measuring equipment and tools
§ Verifies and calibrates various equipment and tools in accordance internal procedures and FAA requirements
§ Applies and adheres to relevant calibration regulations to ensure the equipment is safe, accurate and operational
§ Implements best practices and develops high bench marking activities
§ Ensures all required equipment and standards on site are calibrated and appropriately labeled
§ Maintains records of calibration, and assures that all linear instruments in use are within the acceptable calibration period
§ Issues notices when measurement media failed to be recalled to ensure non-usage by inspection and/or manufacturing personnel
§ Organizes equipment calibration with minimum disruption to the users
§ Performs other duties as assigned
Qualifications / Education
§ Successful completion of assigned training materials through on-the-job training, online content, and classroom led instruction
§ Strong interpersonal and customer service skills
§ Excellent attention to detail
§ Self-motivated learner with the ability to learn new skills related to calibration and calibration processes
§ Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team
§ 3 years driving experience with a valid driver’s license
§ Qualified to meet the requirements of 14CFR 145.155
Education
§ Associates degree from college or technical school, or 3 years related experience and/or training, or combination of education and experience
§ Three (3 ) years of commercial calibration experience
§ Previous experience or training in electronics or machining
§ Basic mathematical skills including algebra, geometry, and statistics
§ Basic organizational and time management skills
§ Proficiency with Microsoft Office computer software including Word, Excel, and Outlook
§ Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics, LabVIEW / Automation Calibration Software, multimeters, Fluke 5522A
§ Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process
Special Requirements
§ Occasionally will be required to lift up to 75 lbs.
§ Employee is often required to site or use their hands and fingers to handle tools and equipment
§ The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl.
TITLE
Calibration Technician 2
COMPANY LOCATION
Wellington, KS
REPORTS TO
Director of Quality
DEPARTMENT NAME
Quality
DEPT#
2170
JOB FAMILY
Tech-Calibration, Assoc
FLSA STATUS
FORMCHECKBOX FFFFFFFF6500000014000000000001000000000000000000000000000000000000000000 Non-Exempt FORMCHECKBOX FFFFFFFF6500000014000000000000000000000000000000000000000000000000000000 Exempt
JOB CODE
QACAHR2_02
JOB GRADE
SALARY RANGE
Negotiable
Position Summary
Calibration Technicians at this level can calibrate higher-level equipment and calibrate equipment across the following disciplines, (e.g., Electrical, Dimensional, Flow, or Pressure). A Calibration Technician 2 will be capable of completing work independently within the lab with limited or no guidance.
Essential Duties and Responsibilities
§ Monitors and performs Calibration tasks in accordance with internal procedures and FAA requirements
§ Conducts incoming inspection prior to calibration on measuring equipment and tools
§ Verifies and calibrates various equipment and tools in accordance internal procedures and FAA requirements
§ Applies and adheres to relevant calibration regulations to ensure the equipment is safe, accurate and operational
§ Implements best practices and develops high bench marking activities
§ Ensures all required equipment and standards on site are calibrated and appropriately labeled
§ Maintains records of calibration, and assures that all linear instruments in use are within the acceptable calibration period
§ Issues notices when measurement media failed to be recalled to ensure non-usage by inspection and/or manufacturing personnel
§ Organizes equipment calibration with minimum disruption to the users
§ Performs other duties as assigned
Qualifications / Education
§ Successful completion of assigned training materials through on-the-job training, online content, and classroom led instruction
§ Strong interpersonal and customer service skills
§ Excellent attention to detail
§ Self-motivated learner with the ability to learn new skills related to calibration and calibration processes
§ Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team
§ 3 years driving experience with a valid driver’s license
§ Qualified to meet the requirements of 14CFR 145.155
Education
§ Associates degree from college or technical school, or 3 years related experience and/or training, or combination of education and experience
§ Three (3 ) years of commercial calibration experience
§ Previous experience or training in electronics or machining
§ Basic mathematical skills including algebra, geometry, and statistics
§ Basic organizational and time management skills
§ Proficiency with Microsoft Office computer software including Word, Excel, and Outlook
§ Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics, LabVIEW / Automation Calibration Software, multimeters, Fluke 5522A
§ Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process
Special Requirements
§ Occasionally will be required to lift up to 75 lbs.
§ Employee is often required to site or use their hands and fingers to handle tools and equipment
§ The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl
TITLE
Calibration Technician 2
COMPANY LOCATION
Wellington, KS
REPORTS TO
Director of Quality
DEPARTMENT NAME
Quality
DEPT#
2170
JOB FAMILY
Tech-Calibration, Assoc
FLSA STATUS
FORMCHECKBOX FFFFFFFF6500000014000000000001000000000000000000000000000000000000000000 Non-Exempt FORMCHECKBOX FFFFFFFF6500000014000000000000000000000000000000000000000000000000000000 Exempt
JOB CODE
QACAHR2_02
JOB GRADE
SALARY RANGE
Negotiable
Position Summary
Calibration Technicians at this level can calibrate higher-level equipment and calibrate equipment across the following disciplines, (e.g., Electrical, Dimensional, Flow, or Pressure). A Calibration Technician 2 will be capable of completing work independently within the lab with limited or no guidance.
Essential Duties and Responsibilities
§ Monitors and performs Calibration tasks in accordance with internal procedures and FAA requirements
§ Conducts incoming inspection prior to calibration on measuring equipment and tools
§ Verifies and calibrates various equipment and tools in accordance internal procedures and FAA requirements
§ Applies and adheres to relevant calibration regulations to ensure the equipment is safe, accurate and operational
§ Implements best practices and develops high bench marking activities
§ Ensures all required equipment and standards on site are calibrated and appropriately labeled
§ Maintains records of calibration, and assures that all linear instruments in use are within the acceptable calibration period
§ Issues notices when measurement media failed to be recalled to ensure non-usage by inspection and/or manufacturing personnel
§ Organizes equipment calibration with minimum disruption to the users
§ Performs other duties as assigned
Qualifications / Education
§ Successful completion of assigned training materials through on-the-job training, online content, and classroom led instruction
§ Strong interpersonal and customer service skills
§ Excellent attention to detail
§ Self-motivated learner with the ability to learn new skills related to calibration and calibration processes
§ Ability to communicate well with supervisor, solve problems effectively, and work both independently and as part of a team
§ 3 years driving experience with a valid driver’s license
§ Qualified to meet the requirements of 14CFR 145.155
Education
§ Associates degree from college or technical school, or 3 years related experience and/or training, or combination of education and experience
§ Three (3 ) years of commercial calibration experience
§ Previous experience or training in electronics or machining
§ Basic mathematical skills including algebra, geometry, and statistics
§ Basic organizational and time management skills
§ Proficiency with Microsoft Office computer software including Word, Excel, and Outlook
§ Experience in PMEL, PME, TMDE, Metrology, Calibration, ASQ CCT, METCAL, GPETE, Electronics, GCAMS, or Avionics, LabVIEW / Automation Calibration Software, multimeters, Fluke 5522A
§ Experience working within ISO 17025 preferred. Understanding of uncertainty contributions to the measurement process
Special Requirements
§ Occasionally will be required to lift up to 75 lbs.
§ Employee is often required to site or use their hands and fingers to handle tools and equipment
§ The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl