Summary This National Guard position is for a SURFACE MAINTENANCE MECHANIC (TITLE 32), Position Description Number D1193000 / D1194000 and is part of the OR UTES 2, National Guard. Responsibilities As a SURFACE MAINTENANCE MECHANIC (TITLE 32), WG-5801-8/10, this position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. (1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all-terrain vehicles, trucks, semi-trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. (2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. (3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment. (4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. May assist higher graded mechanics in repairing a variety of interconnected systems such as electrical, air and hydraulic systems, complex state of the art electrical and electronic systems that use specialized diagnostic equipment to identify problems, complex fuel injection systems and other similar complex systems. (5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). (6) Performs other duties as assigned. *The above description only mentions a limited amount of the position's official duties. For a full comprehensive document that covers all the duties of the position, please contact one of the Recruitment Specialist at the bottom of the announcement. Requirements Conditions of Employment Qualifications Areas of Consideration: Area 1 - Current permanent and indefinite T32 technicians of the Oregon ARNG. Area 2 - Current permanent and indefinite T5 employees of the Oregon ARNG. Area 3 - Current service members in the Oregon ARNG. Area 4 - Individuals in the active duty Army, Army Reserve or Army National Guard. Area 5 - US citizens eligible to meet the military requirements for membership in the Oregon ARNG. GENERAL and SPECIALIZED EXPERIENCE QUALIFICATION REQUIREMENTS: Work is covered by the 5800-job family which includes occupations involved in repairing, adjusting, and maintaining self-propelled transportation and other mobile equipment (except aircraft), including any special purpose features with which they may be equipped. Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. WG-08 - Must have at least 12 months experience or training using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs. Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. WG-10 - Must have at least 18 months experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. Education Additional Information The following applies to Bargaining Unit Positions: Bargaining unit positions within the Oregon National Guard are represented by AFGE, local 2986 (AFL-CIO). If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).