Welder **Location:** Palmerton, PA, United States, 18071 **Company:** Chart Industries **_Ensuring Chart’s Success…_** Hiring at Fronti Fabrications in Palmerton, PA - a Chart Industries company! Wages for welders starting at up to $32.00 per hour. Operating Hours – Monday through Thursday – 6:00-4:30. Must be available to work OT beyond normal operating hours as needed. **_What Your Day-to-Day Activities Will Be…_** + Must train and pass a minimum of 6G level GTAW + GTAW B-31.3 on Aluminum pipe a plus, but not required + Must weld to x-ray quality at all times and when required, pass x-ray and dye penetrant check of welds + FCAW to ASME standards + May weld with other processes and varied weldments and metals as warranted + Works from drawings and specifications + Must identify material and markings to ensure proper piece parts and identification codes are present + Identify and use proper Work Instructions and other related specifications + Must perform fit-checks prior to final assembly with potential to rework fitments to meet drawing specifications + Responsible for quality of weld joint and proper identification of the weld + Setup and operation for ideal welding conditions + Perform minor maintenance on all welding machines such as change torch, foot pedal, fuses, load and adjust MIG wire feeder, and check coolant reservoirs daily. + Set up and operate portable plasma cutter + Preheat preparation prior to welding per instructions + Must keep work area clean and maintain shop housekeeping + May need to perform a job from start to finish including cut/prep /Fitting/ Welding + Unloading and loading of fabricated equipment or inhouse materials **_Your Education Should Be…_** + Must have a certificate/degree in welding from a certified technical college or 12 months of professional welding experience. **_Your Professional Experience Should Be…_** The candidate must have sufficient knowledge and ability to: + Use and interpret sub-assembly drawings. + Must have good dexterity and hand-eye coordination. + Understand and work with welding codes, techniques, and special instructions. + Use measuring devices and have basic knowledge of math. + Work with both MIG and TIG weld processes on SS/ Aluminum and other metals when necessary. + Work closely with support groups such as Engineering and Supervisors. + Responsible for quality workmanship and requirements to reduce or eliminate hold points. The candidate must have sufficient ability to operate: + Welding Machines (MIG & TIG) + Portable Plasma Cutter + Positioner + Oxygen Acetylene Torch + Small Hand Tools + Cleaning Tanks + Various Hand Tools + Wire Brush, Chisel, & Punches + Hand and Electric Trucks + Overhead Cranes + Various Jigs and Fixtures + Bench Grinder + Simple and Complicated Measuring Devices **_Your Physical Work Environment Will Require…_** Works in an average factory environment. Exposed to the following conditions: heat, sharp edges, sometimes above-average noise, burns, fumes, smoke, dust. Protective equipment and clothing provided. Works in awkward positions: bending, reaching, pulling, pushing, standing, and sitting. Lifting 0 to 50 lbs. When lifting over 50 lbs, two people are required. **_Chart is an equal opportunity employer_**